Elecro Engineering B-100 Installation & Operating Manual page 10

Water Quality

The water quality must be within the following limits:

PH 6.8 - 8.0, TA (Total alkalinity) 80—140ppm (parts per million)

Chloride Content MAX: 150 mg/litre

Free Chlorine: 2.0 mg/litre

Total Bromine: Max 4.5 mg/litre

TDS (Total Dissolved Solids) / Calcium hardness 200— 1,000ppm

Stainless Steel heaters are NOT suitable for use on saline (salt) water pools.

B-100 heaters with Titanium elemens are suitable for use with salt water

pools with a salt concentration up to 8000ppm (8g/litre).

Water chemistry is complicated if in doubt seek expert advise.

RoHS Compliance Statement

Elecro Engineering Limited certify that our Electric Swimming Pool Heater

Range complies in accordance with RoHS Directive 2011/65/EC on the

restriction of hazardous substances.

Waste of Electrical / Electronic Equipment

This product complies with EU directive 2012/19/EC

Do Not dispose of this product as unsorted municipal waste.

This symbol on the product or on its packaging indicates that this product

should not be treated as household waste. Instead it should be handed

over to the applicable collection point for the recycling of electrical and

electronic equipment.

By ensuring this product is disposed of correctly you will

help prevent potential negative consequences for the

environment and human health, which could otherwise be

caused by inappropriate waste handling of this product.

The recycling of materials will help to conserve natural

resources. For more information please contact your local

Civic office, your household waste disposal service or the

retailer where you purchased the product.

www.elecro.co.uk