Key System Features; Call Service Function - LG GDK-186 User Manual

GDK-162/100/FPII/20W & LDK-24/100/300/300E WOTS
Wireless Terminal (GDC-345H) User Guide

5.2 Key System Features

5.2.1 Call Service Function

The following features are available only for GDK & LDK series system. So these functions may not
be operated properly with any other system.
Placing an Outside Call
TALK ON/OFF (
by either pre-dialing or post-dialing.
1) Pre Dial
-. GDK-186/100/34E, LDK-130
CO Line Access Code (9, 8+XX or 88+XX) → Phone Number →
-. GDK-20W
CO Line Access Code (9, 8+X or 88+X)
-. LDK-300/600
CO Line Access Code (9, 8+XX or 88+XXX)
1 2
4 5
7 8
0
*
9 X X X X X X X X X
S T A X X X
X X X X X X X X X X
0 0 : 0 0
) button is used to make a call or receive a call. To make a call can be done
You may dial telephone number in an idle state before pressing
3
button (up to 24 digits). Since it is displayed only 12 digits per line on
6
the LCD. If you dial a wrong digit, a user can erase last 1 digit by
pressing
9
for longer than 1 seconds. If you want to insert dialing pause
#
among dial numbers, press
Then "P" is displayed on the LCD.
Dial phone number.
Press
Phone(
The LCD message is displayed as the left figure and
connection tone is heard when connection is completed.
→
Phone Number
→
Phone Number
once and if you want to erase all digit dialed, press
button for longer than 1 second.
.
) icon is blinking on the LCD .
１５
→ Connection
→ →
Connection
→ →
Connection