Weidmuller IE-SW-PL09M-5GC-4GT Hardware Installation Manual page 9

1000BaseT RJ45 Pinouts
Pin MDI MDI-X
1 BI_DA+ BI_DB+
2 BI_DA- BI_DB-
3 BI_DB+ BI_DA+
4 BI_DC+ BI_DD+
5 BI_DC- BI_DD-
6 BI_DB- BI_DA-
7 BI_DD+ BI_DC+
8 BI_DD- BI_DC-
RJ45 (8-pin) to RJ45 (8-pin) Straight-Through Cable Wiring
RJ45 (8-pin) to RJ45 (8-pin) Cross-Over Cable Wiring
100 BaseFX or 1000BaseSFP Fiber Port
The Gigabit Ethernet ports on the IE-SW-PL09M-5GC-4GT are SFP slots,
which require 100BaseFX SFP or Gigabit mini-GBIC fiber transceivers to
work properly. Weidmüller provides transceiver models for various distance
requirements.
Multi mode:
1000BaseSX 0 to 550 m, 850 nm (50/125μm, 400MHz*km)
0 to 275 m, 850 nm (62.5/125μm, 200MHz*km)
1000BaseLX 0 to 1100 m, 1310 nm (50/125μm, 800MHz*km)
0 to 550 m, 1310 nm (62.5/125μm, 500MHz*km)
Single mode:
1000BaseLH 0 to 10 km, 1310 nm (9/125μm, 3.5 PS/(nm*km))
1000BaseLHX 0 to 40 km, 1310 nm (9/125μm, 3.5 PS/(nm*km))
- 9 -