Weidmuller IE-SW-PL09M-5GC-4GT Hardware Installation Manual page 11

IE-SW-PL09M-5GC-4GT DIP Switches
The default setting for each DIP Switch is OFF. The
following table explains the effect of setting the DIP
Switch to the ON position.
"Turbo Ring" DIP Switch Settings
DIP 1 DIP 2
ON: Enables this
Ethernet Switch
as the Ring
Master.
Reserved for
future use.
OFF: This
Ethernet Switch
will not be the
Ring Master.
"Turbo Ring V2" DIP Switch Settings
DIP 1 DIP 2
ON: Enables the ON: Enables this
default ―Ring
Ethernet Switch
Coupling as the Ring
(backup)‖ port. Master.
OFF: Enables the OFF: This
default ―Ring
Ethernet Switch
Coupling will not be the
(primary)‖ port. Ring Master.
NOTE
You must enable the Turbo Ring function first before using the DIP
switch to activate the Master and Coupler functions.
NOTE
If you do not enable any of the DIP switches to be the Ring Master,
the Turbo Ring protocol will automatically choose the switch with
the smallest MAC address range to be the Ring Master. If you
accidentally enable more than one switch to be the Ring Master,
these switches will auto-negotiate to determine which one will be
the Ring Master.
DIP 3 DIP 4
ON: Enables the ON: Activates
default ―Ring
DIP switches 1,
Coupling‖ ports.
2, 3 to configure
―Turbo Ring‖
settings.
OFF: Do not use OFF: DIP
this Ethernet switches 1, 2, 3
Switch as the ring will be disabled.
coupler.
DIP 3 DIP 4
ON: Enables the ON: Activates
default ―Ring
DIP switches 1,
Coupling‖ port.
2, 3 to configure
―Turbo Ring V2‖
settings.
OFF: Do not use OFF: DIP
this Ethernet switches 1, 2, 3
Switch as a ring will be disabled.
coupler.
- 11 -