Specifications - Weidmuller IE-SW-PL09M-5GC-4GT Hardware Installation Manual

Specifications

Technology
Standards IEEE802.3, 802.3u, 802.3x, 802.1D, 802.1w,
802.1Q, 802.1p, 802.1X, 802.3ad, 802.3z
Protocols IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3,
DHCP Server/Client, DHCP Option 66/67/82,
BootP, TFTP, SNTP, SMTP, RARP, RMON,
HTTP, HTTPS, Telnet, SSH, Syslog, Modbus/TCP,
SNMP Inform, LLDP, IEEE 1588 PTP, IPv6
MIB MIB-II, Ethernet-like MIB, P-BRIDGE MIB,
Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON
MIB Group 1,2,3,9
Flow Control IEEE802.3x flow control/back pressure
Interface
RJ45 Ports 10/100/1000BaseT(X) auto negotiation speed, F/H
duplex mode, and auto MDI/MDI-X connection
Fiber Ports 1000BaseSX/LX/LHX/ZX (LC connector)
Console Port RS-232 (10-pin RJ45)
LED Indicators PWR1, PWR2, FAULT, 10/100M (TP port),
1000M, MSTR/HEAD and CPLR/TAIL
Alarm Contact Two relay outputs with current carrying capacity of
1A @ 24 VDC
Digital Input Two inputs with the same ground, but electrically
isolated from the electronics
• For state ―1‖: +13 to +30 V
• For state ―0‖: -30 to +3 V
• Max. input current: 8 mA
Optical Fiber—100 or 1000Base SFP modules
SFP-SX SFP-LSX
Wave-
850 nm 1310 nm
length
Max. Tx
-4 dBm
Min. Tx
-9.5 dBm
Rx Sensitivity
-18 dBm -19 dBm
Link
8.5 dB
Budget
Typical
a
550 m
Distance
Saturation
0 dBm
a. 50/125 μm, 400 MHz * km or 62.5/125 μm, 500 MHz * km @ 850 nm
multi-mode fiber optic cable
b. 62.5/125 μm, 750 MHz * km @ 1310 nm multi-mode fiber optic cable
c. 9/125 μm single-mode fiber optic cable
Gigabit Ethernet
SFP-LX
1310 nm
-1 dBm -3 dBm
-9 dBm -9.5 dBm
-20 dBm
10 dB 10.5 dB
b c
2 km 10 km
-3 dBm -3 dBm
- 13 -
SFP-LHX
1310 nm
1 dBm
-4 dBm
-24 dBm
20 dB
c
40 km
-3 dBm