Alarm Number - KERUI G19 Operation Instruction Manual

No, call alarm OFF, then press key【OK】to save. If selecting OFF, the host will not
alarm if there is an alert in this zone. The factor y default of call alarm is ON.
Note: the siren in this function includes internal and external siren.
4.7.2.4 Zone Attribute
On detector learning page, press key【DOWN】to move cursor to Attribute as
shown in picture 4-18. Press number key to select: 【1】Normal,【2】Stay,【3】
Intelligent,【4】Emergency,【5】Close,【6】Chime,【7】Welcome,【8】Help
Senior, then press key【OK】to save.
4.7.2.5 Network Event Code
On detector learning page, press key【DOWN】to move the cursor to Event Code
as shown in picture 4-19. Press number key to select: 【 1】Medical 【 2 】Fire
【3】Robber y 【4】Silent Robber y 【5】Burglar 【6】Perimeter 【7】Gas, then
, ,
press key【OK】to save.
4.7.2.6 NO alarm/NC alarm in Wired Zone
Select wired zones (51-52), and press key【OK】to enter detector learning page,
press key【DOWN】to move the cursor behind【NO/NC】as shown in picture 4-20,
and press【1】to select NC alarm; 【2】to select NO alarm, then press key【OK】
to save. The factor y default is NO.
CHINA MOBLLE CHINA MOBLLE
16:10
01 Zone Detector 51 Zone Detector
Have added: 2 PCS Have added:
Total: Total:
5 PCS
Siren: on Siren:
Attrebute: Normal Attrebute: Normal
CID eventcod Thief
CID eventcod Thief
1.Ambula 2.Fire 3.Hijack 4.Silent
NO/NC:
5.Thief 6.Around 7.Gas
1.NC
Picture 4-19 Picture 4-20
4.7.3 Access Card
4.7.3.1 Study Access Card
On accessories manage page, as shown in picture 4-7. Press key【UP/DOWN】to
move the cursor behind【Access Card】, then press key【OK】or number 3 directly
to enter access card page, as shown in picture 4-21. There are 20 zones in the
page, and only one access card can be learned in one single zone. Press key
【UP/DOWN】to select zone and the press key【OK】to enter access card study
page as shown in picture 4-22. At this moment, put the access card on the host
card reader location, host will beep "di" if the card be learned successfully, and
the "unlearned" displayed on the screen will change to "learned"; If user continues
to learn access card in the zone has been learned, host will prompt wrong voice,
and it flashes "do not learn" on the screen; If user programs the access card being
learned to the zone unlearned, host will also prompt wrong voice, and it flashes "
re-code" on screen, which means the access card can't be programmed
repeatedly. The host could learn as much as 20 different access cards.
,
, ,
CHINA MOBLLE
16:10 16:11
RFID
2 PCS
RFID 01 Added
5 PCS
on
Empty
RFID 02
RFID 03 Added
NO
2.NO
RFID 04
Empty
Picture 4-21
CHINA MOBLLE 16:11
01 RFID
Added
Add RFID
RFID Disarm: ON
RFID SMS notice:
ON
Picture 4-22
4.7.3.2 Delete Access Cards
Delete access card in single zone: after entering access card page, press key
【UP/DOWN】to select the zones needed to be deleted, press key【OK】, host
,
will pop up a small menu as shown in picture 4-23. If selecting【Edit/Add】, it can
change the set of【 Read Card to Disarm 】and【 Card Read SMS Inform】; if
selecting【Delete】, host will pop up a confirmation menu, select【Yes】, press
key【OK】to confirm, then the access card in this zone be deleted.
Delete all access cards: As shown in picture 4-24, there is Delete All function at
the bottom of access card page. Press key【UP/DOWN】to select this function,
then press key【OK】, it will pop up the confirmation menu, then press key【OK】
again to delete all the access cards in all zones.
4.7.3.3 Read Card to Disarm
On access card learning page, press key【DOWN】to move the cursor behind
【Read Card to Disarm】, then press menu key to switch ON or OFF, press key【
OK】to save. If selecting ON, the access card can disarm the host. The factor y
default is OFF.
4.7.3.4 Card Read SMS Inform
On access card learning page, press key【DOWN】to move cursor behind【Card
Read SMS Inform】, press menu key to switch ON or OFF, then press key【OK】
to save. If selecting ON, after swiping access card, host will text to the alarm
number with access card and the message is "XX number is home". The factor y
default is OFF.
4.7.4 Wireless Strobe Siren
On accessories manage page as shown in picture 4-7. Press key【UP/DOWN】to
move cursor behind【Wireless Strobe Siren】, then press key【OK】or input number
4 directly to enter wireless strobe siren page, as shown in picture 4-25.
CHINA MOBLLE
16:11
Wireless Siren
Wireless Siren OFF
Output with alarm ON
Picture 4-25
4.7.4.1 Code Match between Host & Wireless Strobe Siren
Code Match Method: In strobe siren standby mode, long press key SET until the
CHINA MOBLLE 16:11 CHINA MOBLLE
RFID
Added
RFID 01 RFID 18
Edit / Add
Empty
ON RFID 02 RFID 19
Delete
ON RFID 03 Added RFID 20
RFID 04 Empty Delete all
Picture 4-23 Picture 4-24
CHINA MOBLLE
16:11
Wireless Siren
Off Wireless Siren OFF Off
On Output with alarm ON On
...
Senging
Picture 4-26
16:11
RFID
Added
Empty
Added