KERUI G19 Operation Instruction Manual page 9

CHINA MOBLLE 中国移动
16:11
Attachment
RFID
Press any key to start
Wireless Siren
Wireless Socket
ON
Illegal arming
OFF Off
Picture 4-30 Picture 4-31
4.8 Recording
Host will play the preset recording after dialing the preset alarm number . And
the recording set method is below:
As shown in picture 4-2, on main page, press key【UP/DOWN】to move the cursor
behind【Recording】, then press key【OK】or number 3 directly to enter recording
set page, as shown in picture 4-31; On recording set page, press key【BACK】to
return the main page; Press any key to start recording, and start the countdown
10s, as shown in picture 4-32, at this moment, speak to the host the recording
content. The content should be brief, e.g. " This is XXX house, it 's intruded illegally,
please help".
Host will exit automatically after 10s, and user can press any key to end recording
during the recording process.
4.9 Appliances
As shown in picture 4-2, on main page, press key【UP/DOWN】to move the cursor
behind【Appliances】or press number 4 directly to enter appliances set page,
as shown in picture 4-33.
CHINA MOBLLE CHINA MOBLLE
16:11
Appliance
Sockets list Socket 01
Auto switch Socket 02
Socket 03
Socket 04
Picture 4-33 Picture 4-34
4.9.1 All Sockets
After entering appliances set page, stop the cursor on【All Sockets】and press
key【OK】to enter all sockets set page, as shown in picture 4-34. Press key【UP/
DOWN】to select socket number, then press menu key to switch ON or OFF ( Or
press number key【1】directly to turn on, and press【2】to turn off ) meanwhile,
host will send the signal of ON or OFF, as shown in picture 4-35. Host has 20 sockets
signal ans can program 20 smart sockets at least. The factor y default switch is OFF.
The code match between host and sockets is the same as the code match of
wireless alarm linkage switch, but it don't link to host alarm.
4.9.2 Time Switch
16:15 48% 中国移动 16:16 48%
Rccording 录音
Press any key to stop
Picture 4-32
CHINA MOBLLE
16:11 16:11
Sockets List Sockets List
ON On 1. On 2. Off Socket 01 ON On 1. On 2. Off
Off 1. On 2. Off Off 1. On 2. Off
OFF Socket 02 OFF
Sending...
On 1. On 2. Off On 1. On 2. Off
ON ON
Socket 03
Socket 04
OFF Off 1. On 2. Off OFF Off 1. On 2. Off
Picture 4-35
After entering appliances set page, stop the cursor on【All Sockets】, press key
【UP/DOWN】to move the cursor behind【Time Switch】, then press key【OK】
to enter time switch page, as shown in picture 4-36. There are 40 set items on
the page, press key【UP/DOWN】to select set item, and press key【OK】to enter
time switch set page. As shown in picture 4-37, there are four set items: time,
act, week and socket number, and press key【UP/DOWN】to move cursor and
select and set one by one, press key【OK】to save at last, and exit the set page.
CHINA MOBLLE 16:11 CHINA MOBLLE
Auto switch
1/40
(Empty) Time: 10:08
Oprate:Auto Off
(Empty)
Week:
(Empty)
Socket No. 01
(Empty)
Picture 4-36 Picture 4-37
4.9.3 Delete Time Switch
Delete single time switch: After entering time switch page, press key【UP/DOWN】
to select the set items need to be deleted, then press key【OK】, host will pop
up a small menu, as shown in picture 3-38. If selecting【Edit/Add】, user can
edit and change set items; if selecting【Delete】, host will pop up a confirmation
menu, then select Yes, and press key【OK】to confirm to delete.
Delete all time switches: as shown in picture 3-39, there is a delete all function
at the bottom of time switch page, press key【UP/DOWN】to select this function,
and then press key【OK】, press again key【OK】after the confirmation menu
popped up to delete all set items.
CHINA MOBLLE CHINA MOBLLE
16:11
Auto switch
1/40
Delay
(Empty)
Auto arm/disarm
(Empty)
(Empty)
Date&time
Delete all Volume
Picture 4-39 Picture 4-40
4.10 System Set
On main page, press key【UP/DOWN】to move the cursor behind【System Set】,
then press key【OK】or number 5 directly to enter system set page, as shown
in picture 4-40.
4.10.1 Delay Set
On system set page, put cursor on【Delay Set】, and press key【OK】to enter
delay set page, as shown in picture 4-41.
4.10.1.1 Delay Arm Set
On delay set page, put cursor on【Delay Arm Time】, input the delay time(0-
16:11 CHINA MOBLLE 16:11
Auto switch Auto switch
01/40
(Empty)
Edit / Add
(Empty)
Mon Tue Wed Thu Fri Sat Sun
Delete
(Empty)
(Empty)
Picture 4-38
CHINA MOBLLE
16:11 16:11
System Delay
Arm delay(S): 0 (0-255s)
Arm: 0 s Alarm: 0 s
0 (0-255s)
Alarm delay(S):
Mar. 09.2015 10:09
Voice: 5 Alarm: 5
Picture 4-41