K-Test Summary - 3M 965DSP/SA Instruction Manual

K-Test Summary

If you press the [Enter] key in the previous screen,
the 965DSP will display the following summary of
up to five K-Test results:
The 965DSP displays the Resistance to Faults
(RTF), Resistance Strap to Faults (RSTF), and
the Resistance to Strap (RTS) for up to five
measurements.
The 965DSP also displays the average value of the
five measurements. In general, the average value
of many readings is more accurate than a single
reading.
Use the [Enter] key to display the last K-Test result.
Use the [Tab] key to select distance instead of
resistance. Use the [Setup] key to change the wire
gauge or the temperature used for the conversion
from resistance to distance.
45