Marantz ND8006 Owner's Manual page 14

Contents Connections
q w
A Bluetooth/wireless LAN antenna connectors
Used to connect the included external antennas for Bluetooth/wireless
connectivity when connecting to a network via wireless LAN, or when
connecting to a handheld device via Bluetooth. (v p. 27)
A Place the external antennas for Bluetooth/wireless connectivity
evenly over the screw terminal of rear.
B Turn clockwise until the antennas is fully connected.
C Rotate the antenna upwards for best reception.
q
Front panel Rear panel
Playback
e r t y
w e
Remote control
unit
Settings
B AUDIO OUT connectors
Used to connect devices equipped with analog audio inputs connectors
or an external power amplifier. (v p. 21)
C NETWORK connector
Used to connect to a LAN cable when connecting to a wired LAN
network. (v p. 26)
D DIGITAL AUDIO OUT connectors
q
Used to connect an AV receiver or D/A converter that has a digital input
connectors. (v p. 22)
E FLASHER IN jack
Used to connect a control box, etc. (v p. 28)
F RS-232C connector
Used to connect home automation controller devices fitted with
RS-232C connectors. Consult the owner's manual of the home
automation controller for more information about serial control of this
unit.
Perform the operation below beforehand.
A Turn on the power of this unit.
B Turn off the power of this unit from the external controller.
C Check that the unit is in the standby mode.
14
Index
Tips Appendix