Pc Or Mac Files Cannot Be Played Back (Usb-Dac) - Marantz ND8006 Owner's Manual

Contents Connections

PC or Mac files cannot be played back (USB-DAC)

This unit is not recognized on the computer.
Reconnect the USB cable to the USB port on your computer. When this unit is still not recognized after reconnection, connect to a different USB
0
port. (v p. 24)
Restart your computer.
0
Check the OS of your computer. (v p. 62)
0
When your computer is running on Windows, a dedicated driver software should be installed. (v p. 62)
0
This unit is not selected as the playback device.
Select this unit as the playback device in the sound settings on the computer. (v p. 61)
0
"Signal Unlock" is displayed.
When digital audio signals cannot be detected properly, "Signal Unlock" is displayed. (v p. 70)
0
"Unsupported" is displayed.
"Unsupported" is displayed when audio signals that are not supported by this unit are input. Check the settings on your computer or player software.
0
(v p. 70)
If the computer you use is Mac OS, please check if the ND8006 format is set below 384000.0 Hz using the Audio MIDI Setup. (v p. 70)
0
Front panel Rear panel
Playback Settings
123
Remote control
unit
Tips
Index
Appendix