Playing Tracks In A Specific Order (Program Playback) - Marantz ND8006 Owner's Manual

Contents Connections
Playing tracks in a specific order
(Program playback)
Up to 25 tracks can be programmed.
1
In the stop mode, press PROGRAM.
"Program" is displayed on the display.
2
Use 0 – 9 and +10 to select the tracks.
GExampleH
Track 4 : Press number 4 to select track 4.
Track 12 : Press numbers 1 and 2 consecutively to select track 12.
The number you enter is set about 1.5 seconds after you press
0
the number buttons. To enter a two-digit number, be sure to press
the two number buttons, one immediately after the other.
3
Press 1/3.
Playback starts in the programmed order.
NOTE
0 The program is cleared when the disc tray is opened or the power is turned off.
Front panel Rear panel
Playback Settings
o Checking the order of the programmed tracks
In the stop mode, press 9.
The tracks are shown in the programmed order in the display each
time 9 is pressed.
o Clears the programmed tracks
In the stop mode, press CLEAR.
The last track programmed is cleared each time the button is pressed.
0 You can also select a track to be cleared by pressing 9.
o Clearing the all programmed track
In the stop mode, press PROGRAM.
57
Remote control
unit
Tips
Index
Appendix