Thx ultra2 digital / thx select dolby digital ex /dts es / dolby digital surround receiver, progressive scan universal disc player, system control, 3 chip dlp high definition projector, hd ready plasma monitor, reference control preamplifier/power amplifi (39 pages)
Su recibo de compra es su prueba permanente de haber adquirido un aparato de valor, Este recibo deberá guardarlo en un lugar seguro y utilizarlo como referencia cuando tenga que hacer uso del seguro o se ponga en contacto con Marantz. IMPORTANTE Cuando solicite el servicio otorgado por la garantia el usuario tiene la responsabilidad de demonstrar cuándo efectuó...
Page 3
The CD5001/CD5001OSE is in conformity with the EMC directive and low-voltage directive. Français Le CD5001/CD5001OSE est conforme à la directive EMC et à la directive sur les basses tensions. Deutsch Das Modell CD5001/CD5001OSE entspricht den EMC-Richtlinien und den Richtlinien für Niederspannungsgeräte.
Page 4
Español ADVERTENCIAS - No exponga el equipo a la lluvia ni a la humedad. - No extraiga la tapa del equipo. - No introduzca nada en el interior del equipo a través de los orificios de ventilación. - No maneje el cable de la alimentación con las manos mojadas. - No cubra la ventilación con objetos como manteles, periódicos, cortinas, etc.
INTRODUCTION Thank you for selecting the Marantz CD5001 CD Player for your A / V system. This Compact Disc Player incorporates a number of features de- signed to enhance the listening of your favorite audio sources.
• In winter, droplets of water form on the insides of the windows of a heated room: this is called condensation. This CD player uses an optical lens, so the condensation may form in the following cases. - In a room immediately after the heating has been turned...
2. ACCESSORIES Checking the accessories After opening the cover of the packing box, check that the following accessories are included. • Remote control unit (RC5400CD) DISPLAY POWER PROGRAM CANCEL RANDOM QUICK REPLAY PITCH RESET REPEAT SCROLL/ TEXT TIME RECALL REMOTE CONTROLLER RC5400CD •...
CS4396 D/A converter, which was also made by Cirrus Logic and which has proved to be a valuable asset for the Marantz CD player, has been adopted. During CD play, the PCM signals recorded on the disc are...
4. CONNECTIONS This CD player is connected to an amplifier, CD recorder and other components for use. To ensure that the components are connected properly, refer to the instruction manuals that come with the components to be connected. Before connecting the components, be absolutely sure to turn off their power.
5. NAMES AND FUNCTIONS Front panel z POWER ON/STANDBY switch and Standby indicator This is used to turn the player’s power ON and STANDBY. When it is pressed, the display lights and the power is turned on; when it is pressed again, the power is turned off and STANDBY indicator lights.
NAMES AND FUNCTIONS Display DISC TEXT 1 2 a Main display This displays the time information and text information of the disc played, the setting menus, etc. b TEXT indicator This lights when a disc supporting CD-TEXT has been loaded. c 8 8 8 8 8 (pause) indicator This lights when play is temporarily suspended.
NAMES AND FUNCTIONS Remote control unit DISPLAY POWER PROGRAM CANCEL RANDOM QUICK REPLAY PITCH RESET REPEAT SCROLL/ TEXT TIME RECALL REMOTE CONTROLLER RC5400CD q DISPLAY button This is used to turn off the display (DISPLAY OFF mode). w Numeric buttons (0 to 9) These are used to specify the numbers of the tracks to be played.
Before using the supplied connecting cable to make the connection between the player and the remote control connectors on a Marantz equipment, set the switch to EXTERNAL. Note: Signals cannot be received from the remote control unit if the switch is kept at EXTERNAL when the player is to be used on its own.
BASIC OPERATIONS Playing a specific track • Specifying the number of a track to be played (direct search) Select the number of the track to be played directly by pressing the numeric buttons (0 to 9) on the remote control unit. To select track number 10 or above, use the numeric buttons to select the higher digit first and then select the lower digit.
BASIC OPERATIONS Playing a specific part of a specific track • Searching a specific part of a track (search) While listening to a track being played, it is possible to search a specific part of that track by a forward or backward search. Forward searching through the track now playing The search (forward search) mode is established by holding down the ¡/¢...
7. ADVANCED OPERATIONS Repeat play (playing the same tracks repeatedly) • Playing all tracks repeatedly (all-track repeat) This function repeatedly plays all the tracks. Repeat play is possible even during random play or program play. Press the REPEAT button on the remote control unit. PITCH RESET REPEAT...
ADVANCED OPERATIONS Random play (playing tracks in a random sequence) This function rearranges the tracks into a random sequence and it then plays all the tracks in this random sequence. If it is used together with repeat play, the same tracks can be repeatedly played but in a different sequence every time.
ADVANCED OPERATIONS Program play (playing tracks in the preferred sequence) The order in which the CD tracks are played can be rearranged into the sequence desired. Up to 30 tracks can be programmed. • Program play in the time display mode In the case of a CD-TEXT disc, first press the TIME button on the remote control unit to set the main display to the time display mode.
Page 22
ADVANCED OPERATIONS • Program play in the text display mode In the case of a CD-TEXT disc, tracks can be selected by title for program play. If the main display is set to the time display mode, press the TEXT button on the remote control unit to establish the text display mode.
ADVANCED OPERATIONS Delete program play (play with undesired tracks skipped) This function makes it possible to skip those tracks that you do not want to hear during CD play. Up to 30 tracks can be deleted from the program. • Delete program play in the time display mode In the case of a CD-TEXT disc, first press the TIME button on the remote control unit to set the main display to the time...
Page 24
ADVANCED OPERATIONS • Delete program play in the text display mode In the case of a CD-TEXT disc, the tracks that are not desired can be selected by title for delete program play. If the main display is set to the time display mode, press the TEXT button on the remote control unit to establish the text display mode.
ADVANCED OPERATIONS • Checking the program or delete program contents REPEAT SCROLL/ TEXT TIME RECALL During programming operation or program play, press the SCROLL/RECALL button on the remote control unit. With program play, the programmed tracks are displayed one after the other in sequence on the main display. With delete program play, the deleted tracks are displayed one after the other in sequence on the main display.
ADVANCED OPERATIONS Peak search (searching for the loudest passage) If the cassette deck recording level is adjusted in relation to the peak level on the disc, it is possible to avoid distortion and noise in recording. This facility allows the peak over the entire disc or in the programmed to be detected tracks before proceeding to editing.
B side if it was A side or stop playing and clear edit program if it was B side. • Synchro recording can be started only when a Marantz autoreverse cassette deck (ex. SD4050 etc.) with synchro recording compatibility is connected to the CD player.
Page 28
ADVANCED OPERATIONS - Synchro recording with Marantz one-way cassette deck, or Marantz auto reverse cassette deck set to one side ) mode. After setting up Edit program, setup the cassette deck to rec pause state. Press 3 or 8 buttons of the player to start A side program.
ADVANCED OPERATIONS Pitch control (changing the play speed) The play speed (pitch) can be changed across a ± 12 step. ∗ Digital signals are not output during pitch control. • Increasing the play speed Press the PITCH+ button on the remote control unit. PITCH RESET The “PITCH”...
8. OTHER FUNCTIONS CD-TEXT “CD-TEXT” refers to a new kind of music disc which differs from a conventional music disc in that album titles, track titles and other text information are recorded on it. CDs with the following logos support this function. CD TEXT TEXT The text information is recorded on those parts which were...
If the trouble persists even after the following points have been checked, consult your dealer or nearest Marantz sales office or service center. Disc fails to turn. • Has the mains cord been connected properly? •...
Page 33
You can find your nearest authorized distributor or dealer on our website. U.S.A. Marantz America, Inc. EUROPE Marantz Europe B.V. Printed in China 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. P.O. Box 8744, 5605 LS Eindhoven, The Netherlands is a registered trademark.
Need help?
Do you have a question about the CD5001OSE and is the answer not in the manual?
Questions and answers