Wireless Lan - Marantz ND8006 Owner's Manual

Contents Connections

Wireless LAN

When connecting to the network via wireless LAN, connect the external
antennas for Bluetooth/wireless connectivity connection to the rear panel
and stand them upright.
See "Wi-Fi Setup" on how to connect to a wireless LAN
router. (v p. 94)
Internet
Router with access point
Front panel Rear panel
Playback
Modem
To WAN side
27
Remote control
unit
Settings
0 When using this unit, we recommend you use a router equipped with the following
functions:
0 Built-in DHCP server
This function automatically assigns IP addresses on the LAN.
0 Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching hub with a
speed of 100 Mbps or greater.
0 Only use a shielded STP or ScTP LAN cable (readily available at electronics
stores). (CAT-5 or greater recommended)
0 The normal shielded-type LAN cable is recommended. If a flat-type cable or
unshielded-type cable is used, other devices could be affected by noise.
0 When using this unit connected to a network with no DHCP function, configure the
IP address, etc. in "Network". (v p. 92)
NOTE
0 The types of routers that can be used depend on the ISP. Contact your ISP or a
computer shop for details.
0 This unit is not compatible with PPPoE. A PPPoE compatible router is required if
your contracted line is not set using PPPoE.
0 Do not connect a NETWORK connector directly to the LAN port/ Ethernet
connector on your computer.
0 Various online services may be discontinued without prior notice.
0 Do not carry this unit by the antenna.
Index
Tips Appendix