Add Gauge Information - 8e6 Technologies TAR User Manual

When adding a gauge group, you need to do the following:
• Name the gauge, and specify limit and timespan values
• Synchronize all library categories from the source R3000
• Select library categories for the gauge to monitor
• Assign user groups whose end users' Internet/network
• Verify limit values for library categories included in the

Add Gauge Information

In the Gauge Information box:
1. Type in at least four characters for the Gauge Name
2. Type in the Lower Limit Value of the floor for any gauge
3. Type in the Upper Limit Value of the ceiling for gauge
4. Type in the Timespan in minutes (1-60 Only) for
8 6 T ,
T
E ECHNOLOGIES HREAT
C
ONFIGURATION
with the TAR unit
activity will be monitored by the gauge
gauge, and specify the library category method(s) to be
used by the gauge
using upper and/or lowercase alphanumeric characters,
and spaces, if desired.
activity. The recommended value is 0 (zero).
activity. The recommended value is 200. This can be
adjusted after using TAR for awhile and evaluating
activity levels at your organization.
tracking gauge activity; usually 15 minutes. The
timespan will always keep pace with the current time
period, so that if a timespan of 15 minutes is specified,
the gauge will always reflect the most recent end user
activity from the past 15 minutes.
U
A R
NALYSIS EPORTER SER
S C
ECTION HAPTER
G
UIDE
2: C G S
USTOM AUGE ETUP
, U
SAGE
55