Table of Contents
Advertisement
Manually lock out an end user
To prevent the end user from accessing specified URLs that
result in too much bandwidth usage:
1. In the Individual User View pop-up window (see Fig. 4:1-
2. Specify the Duration (hours) for the lockout by making a
NOTE: If "Unlimited" is selected, the end user remains locked out
of the specified areas on the Internet/network until the adminis-
trator unlocks his/her workstation. To "unlock" the end user, go to
the Lockout window in the URL Dashboard section of the naviga-
tion panel. For information on this feature, see Chapter 3: Alerts,
Lockout Management in the Configuration Section.
3. Click Lockout to open the Lockout dialog box (see Fig.
TIP: Click No to close this dialog box without locking out the user.
4. Specify the Severity of the lockout from the choices in
5. Click Yes to proceed.
8
6 T
,
T
E
ECHNOLOGIES
HREAT
B
M
ANDWIDTH
ANAGEMENT
7), select the name of the Protocol to highlight it.
selection from the pull-down menu (Unlimited, Half Hour,
1, 1-1/2 ... 8).
3:2-20).
the pull-down menu:
• Low - this selection lets you choose which library cate-
gory's contents the end user will not be able to access
• Medium - this selection locks out the end user from
Internet access
• High - this selection locks out the end user from all
network access
• If a "Low" severity was selected, clicking Yes opens
the Lockout by Categories pop-up window (see Fig.
3:2-21).
U
A
R
NALYSIS
EPORTER
SER
S
C
ECTION
HAPTER
G
UIDE
1: M
B
ONITOR
ANDWIDTH
G
AUGES
117
Advertisement
Table of Contents
