Add An R3000 To The Registry - 8e6 Technologies TAR User Manual

A S
DMINISTRATION ECTION
142
C 4: M
HAPTER AINTAIN THE
3. Click Save to save your edits, and to return to the main
Device Registry panel.

Add an R3000 to the registry

1. Click New R3000 to display the R3000 panel (see Fig.
5:4-2).
2. Type in the server Name.
3. Type in the IP address of the server.
4. If this R3000 will be the source server, click the "Source
R3000" checkbox.
TIP: Click Cancel to close this panel and to return to the main
Device Registry panel.
5. Click Save to save and process your information, and to
return to the main Device Registry panel where a square
representing the R3000 device you added now displays.
Delete an R3000 from the registry
Click Delete to delete an R3000 device from the registry,
and to remove the square representing that R3000 from the
main Device Registry panel.
TIP: A source R3000 cannot be deleted. If the current source
R3000 needs to be replaced, please use the edit function to
specify a different R3000 as the source server before deleting the
R3000 currently designated as the source server.
D R
EVICE EGISTRY
8 6 T ,
T
E ECHNOLOGIES HREAT
U G
A R
NALYSIS EPORTER SER UIDE