Sync All Devices - 8e6 Technologies TAR User Manual

Sync All Devices

A forced synchronization should be performed on the TAR
unit if any of the source R3000's related devices listed in the
Device Registry are updated.
1. Click Sync All to open the Sync All Devices pop-up
2. Check the checkbox(es) pertaining to information to be
WARNING: The User Groups synchronization process may be
lengthy and thus may create an impact on the performance of
TAR.
3. Click Synchronize to close the pop-up window and to
8 6 T ,
T
E ECHNOLOGIES HREAT
A
DMINISTRATION
window:
Fig. 5:4-7 Sync All Devices
synchronized between the R3000 and TAR devices, and
to activate the Synchronize button:
• Categories - Make this selection to sync 8e6 supplied
library category updates and custom library categories
from the source R3000 to TAR.
• Source R3000 Devices - Make this selection to sync
information from all devices tied to the source R3000
server (SMTP server, patch server, proxy server, NTP
server) to TAR.
• User Groups - Make this selection to sync LDAP user
group information on the source R3000 to TAR.
begin the synchronization process.
U
A R
NALYSIS EPORTER SER
S C
ECTION HAPTER
G
UIDE
4: M D
AINTAIN THE EVICE
R
EGISTRY
149