Step 2: Change User Name And Password, Set Self-Monitoring - 8e6 Technologies HL-002-006 Quick Start Manual

Step 2: Change User Name and Password, Set Self-
Monitoring
Now that the ER is physically installed on your network and you have configured its net-
work settings, you should be able to access the Administrator console.
Access the Internet
A. Restore the setup workstation you used for the Network Setup to its original settings,
and connect it to the network hub to create an "administrator workstation." (You could
also use another workstation already on the network that you want to designate as
the administrator workstation.)
B. Launch your Internet browser on the administrator workstation.
C. In the address field, enter the LAN 1 IP address you assigned to the ER (Step 1A:
Quick Start menu: administration menu; Step 1B: Network Setup: Network Settings,
item "C"; or Step 1C: IP / LAN1). Be sure to include the port information :88—or
:8843 for a secure connection—in the address field. For example, if the ER were
assigned an IP address of 10.10.10.10, you would enter http://10.10.10.10:88 —or
https://10.10.10.10:8843—in the browser's address field.
D. Click Go. You should be prompted to log into the Administrator console, giving the
User Name (admin) and Password (reporter):
8 6 e r Q
e nterprise eporter uick
s G
tart uide