Part Identification Chart - Weider PRO 345 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. Note: If a part is not in
the hardware kit, check to see if it has been preassembled. Extra hardware may be included. If a part is
missing, call 1-877-992-5999.
M6 Washer M8 Washer
M10 Washer
(26) (16)
(50)
M8 Locknut M10 Locknut
M12 Locknut
(17) (33)
(49)
M4 x 19mm M6 x 40mm M8 x 20mm M8 x 45mm Screw (48)
Screw (22) Screw (30) Screw (37)
M8 x 80mm Bolt (43) M10 x 20mm
Screw (47)
M10 x 70mm Bolt (34) M10 x 75mm Bolt (32)
M10 x 95mm Carriage Bolt (18)
M12 x 88mm Bolt (40)
5