Chapter 5. Removing and installing components
Note: Read the safety notices before servicing (see "Safety notices and labels" on
The field replaceable units (FRUs) in the SAN768B can be removed and installed
without special tools. The SAN768B can continue operating during many of the
FRU replacements if the conditions specified in the procedure are followed.
The following sections contain FRU removal and installation procedures.
Removing and installing the chassis door
Note: The chassis door must be installed to ensure the SAN768B meets EMI and
Time and items required
The replacement procedure for the chassis door takes less than 5 minutes.
Removing the chassis door
To remove a chassis door:
1. Support the door to prevent it from falling.
2. Pull and remove the door.
To install a chassis door:
1. Align the door and push it into place. See Figure 21 on page 52.
© Copyright IBM Corp. 2008
page xiii).
other regulatory certifications.
51