Leds On The Wwn Card And Bezel - IBM SAN768B Installation, Service And User Manual

Figure 20. LEDs on the WWN card and bezel
1
CP blade Status (above) and
Power (below) LEDs
2
CR blade Status (above) and
Power (below) LEDs
The WWN card LED patterns and the recommended actions for those patterns are
described in Table 16.
Table 16. WWN bezel LED descriptions
LED purpose Color
Port blade/CP blade/ Steady green
CR blade Power
Port blade/CP blade/ Steady amber
CR blade Status
No light (LED is OFF) Blade is OK.
Note: If a blade slot or power supply bay has a filler panel installed, the corresponding
LEDs on the WWN blade do not light up.
1
2
3
4
3
Port blade Status (above) and
Power (below) LEDs
4
Slot numbers
Recommended
Status action
Power is OK. No action required.
Blade is faulty. Check blade.
No action required.
Chapter 4. Monitoring system components
49