Airline Travel Notice - Motion Computing CFT-003 Safety Manual

• This device may not cause harmful interference.
• This device must accept any interference received,
including interference that may cause undesired
operation.
FCC CAUTION: Any changes or modification not expressly
approved by the party responsible for compliance could
void the user's authority to operate this equipment.
Operation of this wireless communication device is subject
to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received,
including interference that may cause undesired
operation.
Do not attempt to service the wireless
WARNING:
communication device built into the Tablet PC yourself.
Such action may void the warranty on the Tablet PC.
Contact your Motion Reseller or Motion Computing for
information about servicing your wireless communication
device.
FCC CAUTION: This device was tested for SAR (Specific
Absorption Rate) in a body-worn and portable
configuration. The device was found to comply with the
FCC requirements for RF exposure when used in the
docking station, held in the hand, or placed on the lap.
Maximum measured SAR levels for the Motion Tablet PCs
were:
Mode Frequency
802.11b 2.4 GHz
802.11a 5 GHz
802.11n 2.4 GHz
802.11n 5 GHz
Any changes or modification not expressly approved by
the party responsible for compliance could void the user's
authority to operate this equipment.
Note: The Radio Frequency (RF) emitter installed in your
Tablet PC must not be located or operated in conjunction
with any other antenna or transmitter. 802.11 (WLAN) and
CDMA/EVDO (WWAN) cannot function or transmit at the
same time. Before selecting the radio (WLAN or WWAN) to
be used, the user must disable the radio that will not be
used.
Use Motion Dashboard to disable internal
Important:
Tablet PC wireless operations. (Start > All Programs >
Motion Computing > Motion Dashboard) Tap Wireless,
then disable any wireless adapters such as Wi-Fi
(802.11 WLAN), Bluetooth, WWAN, and RFID.
8
Modifications
The FCC requires that you be notified that any changes or
modifications made to this device that are not expressly
approved by Motion Computing, Inc. may void your
authority to operate the equipment.
Cables
Connections to this Tablet PC must be made only with
shielded cables. This reduces possible interference with
radio communications and complies with FCC Rules and
Regulations for this EMC classification.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
This equipment was tested for Specific Absorption Rate
(SAR) in a body-worn or portable usage configuration. All
users of this equipment will not be exposed to harmful
radio frequencies. Motion has ensured user safety by
limiting the screen rotation to maintain a minimal
separation distance of 20cm between the radiating
antenna and the human body. Nevertheless, this device
should be used in such a manner that the potential for
human contact during normal operation is minimized. This
equipment contains an internal antenna transmitter whose
effective use may be affected if it is co-located or operating
in conjunction with any other antenna or transmitter.

Airline travel notice

The FAA requires that you suspend wireless
Value
operations before boarding an airplane. These include
(W/Kg)
both internal and external wireless devices.
1.39
Important:
Tablet PC wireless operations. (Start > All Programs >
1.42
Motion Computing > Motion Dashboard) Tap Wireless,
0.844
then disable any wireless adapters such as Wi-Fi
(802.11 WLAN), Bluetooth, WWAN, and RFID.
0.661
IC notice (Canada only)
Canada ICES-003, Class/Classe B
This device complies with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two
conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement."
This Class B digital apparatus complies with Canadian ICES-
003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
The device could automatically discontinue transmission in
Use Motion Dashboard to disable internal
English