Using The Battery - Samsung N150 User Manual

The top line of the display screen
Display indicators (or icons) appear across the top of your phone's
display screen. The signal strength and battery strength icons are
always displayed, but the other icons appear based your phone's
operating mode.
Signal strength: This icon always appears when your phone is on,
and shows your current signal strength. The more lines displayed, the
better the signal strength. Four lines indicate maximum strength.
Service indicator: This icon indicates a call is in progress. If there is
trouble with signal strength, this indicator will have a diagonal line
through it.
No service indicator: This icon indicates your phone cannot find a
signal because you are outside a service area. When displayed, you
cannot send or receive calls. Wait for a better signal or move into an
open area to regain service.
Note: The no service indicator always displays when you turn on your phone.
When service is located, the indicator disappears.
Roaming: This icon displays when the phone is outside your
carrier's area and receiving service from another carrier's network.
If you are:
.
In your home service area, this indicator does not display.
.
In a preferred analog or digital roaming area (where your service
provider has a roaming agreement in place), this indicator is on, but
not flashing.
.
In an analog or digital area that is not covered by your phone's
service provider, this indicator is on.
New Message: This icon appears when a new voice, text or page
message, or net alert is received.
Digital mode: This icon indicates your phone is operating in digital
mode. Your phone has some features that work only in a digital
service area; these services include the Web Browser and certain
other message(s) services. If this icon is not displayed, your phone is operating in
analog mode.
Vibrating mode: This icon indicates that an incoming call will make
the phone vibrate rather than ring. This feature is used for situations
where your normal ringer may disturb others, or for " loud" situations
where a ringer cannot be heard.
Battery strength: This icon is displayed when your phone is active.
It displays your battery's current charge level. The more bars, the
greater the charge. When the battery becomes very low, an empty
battery icon displays and the phone flashes an alert; this indicates that
your phone is about to turn itself off.

Using the battery

Note: Your phone comes packaged with a partially charged, rechargeable
standard Li-ion battery. The phone can be used while the battery is charging,
but must be fully charged the first time you use your phone otherwise the
battery could be damaged.
Installing the battery
The battery attaches to the phone very easily:
SCH-N150 User Guide Draft Rev 1.2 3/16/01 22