Accessing Menus By Scrolling - Samsung N150 User Manual

Using your phone's menus
The phone offers a range of functions that allow you to tailor the phone
to your personal requirements. These functions are arranged in menus
and submenus.
The menus and submenus can be accessed by scrolling or using shortcuts.

Accessing menus by scrolling

Menu items are numbered and can be accessed by scrolling then
selecting that option. For example:
1.Press the [MENU] key in standby mode to access the menu.
2.To enter the Sounds menu, press the navigation key right until the Sounds menu animation displays.
3.Press the [OK/Message] key to select this option.
4. Again, press the navigation key right or down to scroll to Alerts.
5. Press the [OK/Message] key to enter the Alerts menu.
6. Scroll to Connect, using the same navigation key.
7. Press the [OK/Message] key to enter the Connect menu.
8. Press the navigation key up or down to select the desired setting.
9. Press the [OK/Message] key to confirm your selection.
10. Your phone saves this setting and returns to standby mode.
Returning to the previous menu
.
To return to the previous menu, press the [C] key.
.
Select the [C] key to exit the menu without saving the setting.
Accessing menus by using their short cut number
The menu items are numbered and can be accessed by using their
shortcut numbers.
1. In standby mode, press the [MENU] key to access the menu options.
2. Key in the first digit of the required 'shortcut' number shown on the
display, repeat this action for each digit displayed as menus are displayed.
For example:
Setting the Connect tone to 'on'.
1. Press the [5 JKL] key for Sounds.
2. Press the [4 GHI] key for Alerts.
3. Press the [3 DEF] key for Connect.
Note: For further details see " List of menu functions" on page 27 for the
numbers assigned to each menu item.
Your phone's modes
Lock mode
When you lock your phone using the Lock mode menu option, phone
use becomes restricted. You can receive messages and calls, but you
cannot make an outgoing call until the phone is unlocked. To unlock
the phone, press [MENU], navigation key, or [OK/Message] key and enter the
lock code. The phone will return to standby mode.
Power save mode
Your phone comes with a Power Save feature that automatically
activates if your phone is unable to find a signal after 15 minutes of
searching. While this feature is active, the phone's battery charge is
conserved. The phone automatically rechecks periodically for a signal.
To manually force the phone to recheck for a signal, press any key. A
SCH-N150 User Guide Draft Rev 1.2 3/16/01 20