Samsung N150 User Manual page 32

5. Press the navigation key to scroll through the available choices. You can edit the phone number, the entry
name, the entry location, and turn secret on or off, edit the entry category or relation, or change ring type.
(See page ?? under Add Entry)
6. Press [MENU] for options when the desired information is highlighted.
7. Edit the information and p ress [OK/Message] to accept or [C] to return to the previous menu.
8. Press [OK/Message] to save all the edits and exit.
Prepending a phone number
The Prepend option lets you add digits such as area codes and network
feature activation codes in front of a phone number that is stored in your
Phone Book or Call Logs.
Note: You can only enter up to 10 digits for prepending numbers to any phone number.
To Prepend a stored phone number:
1. Press [MENU] to display the menu.
2. Press [1 .-'] for Calls or [2 ABC] for Phone Book.
3. Find the number you want to Prepend using one of the search methods
described under "Answering a call" on page 52, and then press [OK/Message].
4. Press [MENU] to display options. Scroll down to "Prepend".
5. Press [OK/Message] to Prepend the number.
6. The screen displays " Prepending" . Use the keypad to enter the calling
prefix digits and then press [SEND] to place the call.
Erasing a phone book entry
To erase an entry in the Phone Book:
1. From standby mode, press the navigation key left and search for the Phone Book entry that
you want to erase using one of the search methods described under "Find Name" or
"Find Entry" on page 52.
2. Highlight the entry and p ress [OK/Message] to display the entry to erase.
3. Press [MENU] for options.
4. Scroll down to the 'Erase' option.
5. Press [OK/Message] for Erase. Your phone will prompt for confirmation.
Toggle between 'Yes' or 'No', then p ress [OK/Message] to confirm and erase the entry,
or press [C] to cancel and return to the Phone Book information screen.
The "Erased" notification displays.
Erasing all entries in the phone book
See "Clear MEM" on page 149.
Adding a name ringer
You can associate nine tones or four melodies to the
numbers stored in your Phone Book. When you receive an incoming call from
a number matching an entry in your Phone Book, your phone will play the
associated ringer to announce the call.
Note: If the Caller ID information was unavailable for an incoming call, then
the Name Ringer option will also be unavailable.
To add a Name Ringer to a Phone Book entry:
1. From standby mode, press the navigation key left and search for the Phone Book entry that
you want to add a name ringer using one of the search methods described under "Find Name" or
"Find Entry" on page 52.
2. Highlight the entry and press [OK/Message].
3. Press [MENU] for Options.
4. Press the navigation key to scroll down to 'Name Ring' and press [OK/Message].
SCH-N150 User Guide Draft Rev 1.2 3/16/01 31