Samsung N150 User Manual page 57

Setup
Auto retry
When the Auto retry option is activated, your phone automatically
retries the last call up to ten times when a connection fails.
How to enable Auto Retry:
1. Press [MENU] to display the menu.
2. Press [9 WXYZ] for Setup.
3. Press [1 .-'] for Auto Retry. The Auto Retry screen displays.
4. Press the navigation key to toggle between Off, every 10 seconds, every 30 seconds
and every 60 seconds. Press [OK/Message] to save your option.
5. Pressing [C] returns you to the previous screen.
Auto Answer
When the Auto answer option is activated, your phone automatically
answers calls after a specified number of rings. This option is useful
when driving or you are unable to answer the phone.
If Auto Answer is set to 'Off', the phone does not answer the incoming
call. If you do not answer the call it is automatically stored in the
Missed Call log.
How to enable Auto answer:
1. Press [MENU] to display the menu.
2. Press [9 WXYZ] for Setup.
3. Press [2 ABC] for Auto Answer. The Auto Answer screen displays.
4. Press the navigation key to scroll between Off, after 1 ring, after 3 rings, and after 5 rings.
Press [OK/Message] to save your option.
5. Pressing [C] returns you to the previous screen.
Answer Mode
When the Answer Mode option is activated, your phone allows you to
select a specific answer mode when receiving an incoming call. Your
phone can be preset to answer when you do any of the following:
−
by send key: You can answer the call by pressing [SEND]
−
by flip open: You can answer the call by opening the flip cover of the phone.
−
by any key: You can answer the call by pressing any key on the phone.
To set the Answer Mode:
1. Press [MENU] to display the menu.
2. Press [9 WXYZ] for Setup.
3. Press [3 DEF] for Answer Mode.
5. Press the navigation key to scroll between 'by flip open', 'by send key', and 'by any key'.
Press [OK/Message] to save.
5. Pressing [C] returns you to the previous screen.
Tone Length
Some older phones only recognize longer tones. Therefore you may
have to change the tone length for some calls. When calling a paging
system or a credit card company, remember that your phone should be set in the normal mode.
To change the Tone length:
1. Press [MENU] to display the menu.
2. Press [9 WXYZ] for Setup.
3. Press [4 GHI] for Tone Length. The Tone Length screen displays.
4. Press the navigation key to scroll between 'normal', and 'long'. Press [OK/Message] to save.
5. Pressing [C] returns you to the previous screen.
SCH-N150 User Guide Draft Rev 1.2 3/16/01 56