Samsung N150 User Manual page 68

2. Press [0 Next] for Security. Enter the 4-digit lock code.
3. Press [2 ABC] for Restrict.
4. Press the navigation key to scroll between 'Yes' or 'No'. Press [OK/Message] to confirm
the restriction.
5. Or, p ress [C] to exit and return to previous menu.
Lock Code
The default lock code for your phone is the last four
digits of your phone number. You can enter a personal lock code or
change the lock code as often as you like.
To enter a new lock code:
1. Press [MENU] to display the menu.
2. Press [0 Next] for Security.
3. Enter your current 4-digit lock code.
4. Press [3DEF] for Lockcode.
5. When prompted with "ENTER NEW CODE", enter a new 4-digit lock code by pressing the numeric keys.
6. You will be prompted again with "RE-ENTER NEW CODE". Enter the same 4-digit lock code to confirm.
7. Or, p ress [C] to exit and return to the Security menu.
Note: Your phone does not allow viewing of the lock code unless you know the
lock code (this is for obvious security reasons). So, if you change the lock
code, be sure to write down or memorize the new code.
Emergency #
Your phone provides the option of storing three emergency or special
numbers. Each special number can be up to ten digits long.
All special numbers can be manually dialed at any time, even when
your phone is locked or restricted. This feature is useful for controlling what
numbers can be dialed from your phone.
Note: Emergency numbers 911, *911, and #911 are hard-coded to your
phone. You can dial these numbers by pressing [SEND] after number entry at any time, even when
the phone is locked or restricted. If you dial 911, *911, or #911, an audible tone is heard
and an "Emergency" prompt displays during the duration of the call to alert you that a 911 call is in progress.
IMPORTANT NOTICE! PLEASE READ!
Because of various transmission methods, network parameters, and
user settings used to complete a call from your wireless phone, a
connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all wireless
networks at all times.
DO NOT depend on this phone as a primary method of dialing 911 or
for any other essential or emergency communications.
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
Storing numbers
To store special numbers that allow you to dial even when phone is locked or restricted:
1. Press [MENU] to display the menu.
2. Press [0 Next] for Security and enter your current lock code.
3. Press [4 GHI] for Emergency #.
4. Press [1 .-'], [2 ABC], or [3 DEF] to select from three entries.
5. Enter the special number. You can enter up to 10 digits for each number.
6. Press [OK/Message] to save the number entered.
7. Press [C] to exit and return to the Security menu.
SCH-N150 User Guide Draft Rev 1.2 3/16/01 67