Display - Samsung N150 User Manual

5. Press [OK/Message] while reviewing a voice dial entry to erase that entry.
6. Press [C] to return to the previous screen.
7. When the last entry is played, the phone returns to standby mode.
To erase all voice dialing entries:
1. Press [MENU] to display the menu.
2. Press [7 PQRS] for Voice Dial.
3. Press [3 DEF] for Erase All.
4. At the voice prompt, p ress [OK/Message] to confirm Erase of All the entries.
The display screen will inform you when all entries are successfully erased.
5. If you wish to exit without erasing any voice dialing entries press [C]
and you will return to the previous menu.
Set Active
Voice dialing is always on once you have programmed the phone to
accept voice dialing entries and associated the phone numbers. To
place voice dialing calls, press and hold [* Shift]. Then say the name
into the phone after you hear the voice prompt and the beep.
You can also initiate a voice dialing call by simply opening the phone's
flip cover ( this option is selected through the menu).
To change voice dialing activation options:
1. Press [MENU] to display the menu.
2. Press [7 PQRS] for Voice Dial.
3. Press [4 GHI] for Set Active.
4. Scroll between the following options:
. [*] only:
Enables voice dialing only by pressing and holding [* Shift].
. [*]/Flip :
Enables voice dialing either when pressing and holding [* Shift] or
when the flip cover of the phone is opened.
5. Press [OK/Message] when the desired option displays.
SCH-N150 User Guide Draft Rev 1.2 3/16/01 53