IKUSI T70/1 Operation & Installation Manual page 7

3.- SYSTEM DESCRIPTION
The TM70/1 and TM70/2 push-button transmitter type, radio remote control systems are designed for
the remote control of hoists and cranes, and are particularly suitable for applications when the operator
needs to be able to choose the best location from which to carry out an operation.
The system consists of a transmitter for selecting commands and a receiver, which is connected to the
electrical system of the machine to be operated. The system also comes with a battery charger and two
rechargeable batteries.The main specifications are as follows:
The TM70 system
Frequency band
Response Time
Temperature range
The T70/1 and T70/2 Transmitters
Ingress protection
The R70/13 and R70/21 Receivers
Power supply
Consumption
Relays
STOP Relays
Protection
Electrical Security
Storage temperatura range (24h)
Storage temperatura range —long periods-
Relative humidity:
LR71-AC: Input protection (F1)
LR72-AC:Input protection (F1)
LR71-DC y LR72-DC:Input protection (F1)
The CB70/BC70K battery charger
Power supply
The BT06K battery
Voltage
Capacity
Charging temperature
Discharge temperature
Autonomy
TM70Bi V3.2 (11/02) 1121174 L0.pdf
IKUSI reserves the right to change this information without prior notice.
869,700 to 870,000 MHz; ERP <5mW
433,050 to 434,040 MHz; ERP <1mW
434.040 to 434.790 MHz; ERP <10mW
450.000 to 464.000 MHz; ERP <120mW
902.000 to 928.000 MHz; ERP <1mW
100 ms
-20º to +70ºC
IP65 / NEMA-4
48, 115, 230 Vac ± 10%, 50/60 Hz
Optional 12 or 24 Vdc
20 W
230 Vac/8 A
230 Vac/6 A
IP65 / NEMA-4
Class II (EN50178)
-25°C / +75°C (-13°F / 167°F)
-25°C / +55°C (-13°F / 131°F)
Máx. 95% (without condensation)
Fuse: 0,5A/250V FAST
Fuse: 0,63A/250V FAST
Fuse: 2A/250V FAST
230 Vac ± 10%, 50Hz;
optional 115 Vac, 60 Hz;
DC Range: from 10,5v to 35v
4.8 V
750 mAh NiMH
0º to 45ºC
-20º to 50ºC
10 h (operating at 50%)
3