Advertisement
If you want to set up additional ranges of addresses, follow the same instructions as above. Note: You cannot
overlap the IP address ranges. If you do, an error will pop up telling you that you have an overlap region. Check
all of the ranges for overlaps and try again.
When you are finished, click Apply, and you should see a message saying Operation Successful.
ACA settings for TEs using DHCP assigned IP address: This option allows you to set up the UT for
dynamic background ACA. This means that any device connected to the UT will automatically receive a
background PDP context.
To activate this feature, select the On radio button under ACA settings for TEs using DHCP assigned IP address
and click Apply. To have the context only be activated when the TE sends data, select "DA".
22
Hughes 9350 BGAN Terminal User Guide
Advertisement
