Advertisement
A CA
3 1 B
This Web page allows you to use Automatic Context Activation (ACA) in two different ways: (1) Using static IP
addresses in the TE device you can establish an automatic PDP context with any QoS that is offered by the
network (upper half of the Web page)or (2) Using DHCP from the UT, you can establish an automatic background
PDP context for any TE that connects to the UT (lower part of the Web page).
You can also chose whether the context should be activated as soon as the UT detects the device, or if the
context should only be activated when the TE attempts to send data to the satellite link. For the "data activated"
option, use the "DA" button rather than the On button. With DA, if the context is ever deactivated, it will be
reactivated when more data is sent.
ACA settings for TEs with Static IP address:
You can set up your own range of static IP addresses for setting up an automatic PDP context with any of the
QoSs offered by the network.
To turn on a particular range of addresses, select the "On" radio button and choose a range of addresses, low and
high, to use (such as 192.168.128.200 to 192.168.128.205) or leave the defaults. To have the context only be
activated when the TE sends data, select "DA".
Next select the desired QoS for that range of IP addresses (32K streaming). The APN listed is the default APN
read from the USIM card (bgan.inmarsat.com). If your USIM is provisioned for more than one APN, you can type
a secondary APN in this field.
If your service provider requires a username and password, enter them in the next two fields.
Hughes 9350 BGAN Terminal User Guide
21
Advertisement
