▀ Installing Cards
Figure 11.
Card Installation Procedure
Step 1
Determine the type of card you are installing. The card type is identified by the label within the bottom handle of the
card.
Step 2
Determine in which chassis slot to install the card based on the information in the table at the beginning of this chapter.
Step 3
Position both handles on the circuit card to be up and away (outwards) from the front panel of the card.
▄ ASR 5500 Installation Guide
64
Card Ejector Handle
1
Ejector handle
3
Captive screw
2
Ejector subhandle (interlock)
Card Installation