Mounting The Chassis - Cisco ASR 5500 Installation Manual

▀ Installing the Chassis

Mounting the Chassis

Flush Mount
Step 1
Position the chassis in the equipment rack so that the flanges of the mounting brackets at the front of the chassis are
flush with the mounting rails of the equipment rack.
Step 2
Mount the chassis to the rack rails using the OEM hardware that was supplied with the equipment rack. Begin with the
two bottom holes and work your way up until all holes on each flange are secured.
Step 3
Repeat step 1 and step 2 if you are installing an additional chassis in the equipment rack/cabinet.
Step 4 If you took steps to reduce the weight of the chassis prior to installation, refer to Re-Installing Chassis Components.
Otherwise, proceed to
▄ ASR 5500 Installation Guide
52
Grounding the Chassis.
Chassis Installation