Statement 383-Grounding Requirement, Green And Yellow 6 Awg Ground Wire; Statement 390-Power Cord Installed To Power Module; Statement 1004-Installation Instructions; Statement 1006-Chassis Warning For Rack-Mounting And Servicing - Cisco NCS 500 Series Regulatory Compliance And Safety Information Manual

Statement 383—Grounding Requirement, Green and Yellow 6
AWG Ground Wire
This equipment needs to be grounded. Use a green and yellow 6 AWG ground wire to connect the host to earth
Warning
ground during normal use.
Statement 390—Power Cord Installed to Power Module
Warning To reduce the risk of electric shock, switch on the power only after the power cord is completely installed into
the power module.
Statement 1004—Installation Instructions
Read the installation instructions before using, installing or connecting the system to the power source.
Warning
Statement 1006—Chassis Warning for Rack-Mounting and
Servicing
Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure
that the system remains stable. The following guidelines are provided to ensure your safety:
•
•
•
Regulatory Compliance and Safety Information—Cisco NCS 500 Series Routers
6
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest
component at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit
in the rack.
Regulatory Compliance and Safety Information—Cisco NCS 500 Series Routers