Rack-Mounting The Chassis - Cisco CGR 2010 Installing And Connecting

Installing and Connecting the Router
Installing the Router in a Rack
Note: Allow at least one rack unit of vertical space above the router.

Rack-Mounting the Chassis

The Cisco CGR 2010 router can be installed in a 19-inch (48.26-cm) standard rack.
You can mount the router in the following ways:

Power-supply side mounting—Brackets attached at the power supply side of the chassis with the power-supply side
facing forward.

Cable-side mounting—Brackets attached at the cable side of the chassis with the cable side facing forward.
Figure 1 on page 28
Figure 1 Rack-Mount Brackets for the Cisco CGR 2010 Router
Attaching Rack-Mount Brackets to Cisco CGR 2010 Routers
To attach the long side of each bracket to the Cisco CGR 2010 router, use four of the supplied number-8 Phillips flat-head
screws.
Figure 2 on page 28
Figure 2 Bracket Installation for Power-Supply Side Mounting
Figure 3 on page 29
shows the rack-mount brackets used with the Cisco CGR 2010 router.
shows how to attach the brackets to the sides of the router with the power-supply side forward.
PS U1
SFP
SFP
CAU TION 0/1 GE
ACT 0/0 GE SLO T
: This unit EN 0/1
one pow may have EN 0/0
er sour ce. mor e than LINK
sour ces Disc onne LINK
befo re serv ct all pow 3 USB PSU
elec tric icing to er 1
shoc k. avoi d CON
2
SYS SPD
SPD SPD
SPD
2 0
CON SOL
E
1
shows how to attach the brackets to the sides of the router with the cable-side forward.
PS U2
CF1
DO NOT
REM OVE
NET WOR DUR ING CF0
PS
K OPE RAT Inpu t Term
ION Type inal
Sym bol Inpu t Rati
Lo V DC ng
DO NOT Per Sou
REM OVE Lo rce
NET WOR DUR ING
Hi V DC 24 - 60
K OPE RAT Hi V
ION or 10A
100- 250V
V AC ~ 2A
100- 240V
Cis co Co ~
50-6 0 Hz
nn ec ted 2A
Gr id Ro
ute r 20 00
Se rie s
28