Autel Robotics X-Star User Manual page 2

IMPO RT A NT
This product is not intended for use by children without adult supervision.
Do not use with incompatible components or alter the product in any way
inconsistent with the instructions provided by Autel Robotics.
Take-off and Landing
• The aircraft should be placed in a distance of approximately 5 meters
heading away from you on a leveled surface.
• Do not take-off or land on slopes or uneven surfaces.
• Fly in an open and safe area; keep away from buildings, trees, people and
moving vehicles
• Keep the aircraft steady still and approaching to the ground by one meter or
less before landing.
• Land immediately when the low battery warning sign is displayed even if the
light is soon to be inished. The temperature and wind condition may use
more energy from the battery.
In Flight
• Avoid lying beside or above yourself or other people.
• Avoid lying the aircraft out of sight.
• Keep the aircraft away from potential obstacles such as trees, buildings etc.
• Leave enough space for turning and moving.
• Do not ly in severe weather conditions, including but not limited to typhoon,
tornadoes, rain, storms, thunders, hail or snow.
• Avoid lying near hazardous situations, including but not limited to ire,
explosions, landslides, loods or earthquakes.
• Keep away from facilities that could produce electromagnetic interference to
avoid failure of location accuracy, including but not limited to power plants,
power transmission lines, transformer substations or broadcasting towers.
• Avoid interferences from other remote controller transmitters or deliberate
jamming attempts.
• Follow the instructions once you see a warning on the app.
WA RNING
If any part of the aircraft (including motor, battery, gimbal, compass,
propellers, LED lights, binding buttons, etc) or the remote controller fails
to function properly or has visible/invisible damages, DO NOT FLY THE
AIRCRAFT.
Battery Usage
The aircraft is powered by a Lithium-Polymer battery. LiPo/Li-Ion batteries can be
extremely hazardous and special attention is required during usage.
Read and follow carefully all safety messages and instructions presented to
avoid personal injury or property damage.
WA RNING
The Lithium-Polymer battery is factory replaceable only; incorrect
replacement or tampering with the battery pack may cause an explosion.
• Only use the battery and battery charger provided by Autel Robotics. Use
of an unqualiied battery or charger may present a risk of ire, explosion,
leakage, or other hazards. Autel Robotics takes no responsibility for any
damage caused by non-Autel-Robotics batteries or charging devices.
• Always turn off the aircraft before installing or removing the battery.
• Remove the battery before assembly or when not in use.
• Keep the battery away from water or any kind of liquid. If the battery gets in
touch with liquid, it may lead to an explosion while using or charging.
• Do not expose the battery to ire, explosion or other hazards.
• Do not disassemble, open, crush, bend, deform, puncture or shred the
battery.
• Do not modify, remanufacture, or attempt to insert foreign objects into the
battery.
• Do not place heavy objects on the batteries or charger.
• Stop using or charging the battery immediately whenever the battery starts
to swell, smoke or leak.
• Use the battery in temperatures between -10°C and 40°C. Extremely high
temperatures may cause a ire or explosion, extremely low temperatures
may lead to permanent battery damage.
• Do not use the battery in strong electrostatic or electromagnetic environments.
Electrostatic or electromagnetic interference may lead to serious accidents
during light.
• Keep the battery out of reach of children and pets.
• Do not leave the battery close to moist or heat sources. Store the battery in a
dry and ventilated area at room temperature (ideally 22°C-28°C).
• Do not place the battery beside hard or sharp items, or on a conductive
surface (e.g., metal plate).
• Do not place the battery in wet grass or in the pocket with metal objects.
• Battery electrolytes are highly corrosive. If any electrolytes make contact
with your skin or eyes, immediately wash the affected area with fresh running