Setup - Crestron CWD6671 Operation Manual

Crestron CWD6671

Setup

Hookup Connections for CWD6671
Operations Guide - DOC. 6834
Hardware Hookup
Refer to the hookup diagram below, which shows the connections made to the
module. Complete the connections in any order.
NOTE: To prevent unit-to-unit RF interference, multiple modules operating at the
same frequencies should not be installed within three to five feet of each other.
For more information on these connectors, refer to "Ports" on page 3.
Two-Way RF Transceiver Module
Two-Way RF Transceiver Module: CWD6671 • 7