Setup; Hardware Hookup - Crestron CWD6609 Operation Manual

Two-Way RF Transceiver Module

Setup

Hookup Connections for CWD6609
HOST PCB
6 • Two-Way RF Transceiver Module: CWD6609

Hardware Hookup

Refer to the hookup diagram below, which shows the connections made to the
module. Complete the connections in any order.
NOTE: To prevent unit-to-unit RF interference, multiple modules operating at the
same frequencies should not be installed within three to five feet of each other.
+5V
CONTROL
For more information on these connectors, refer to "Ports" on page 3.
Crestron CWD6609
ANTENNA:
TRANSMITS AND RECEIVES
RF SIGNALS
(LOCATED ON OTHER SIDE)
Operations Guide - DOC. 6838A