Printek FormsPro 4300 Operation Manual page 28

Operation
Function
F# Scroll+:
F# Cut Adj:
F# Prnt Adj:
Page 3-8
Possible Values
0* through 127
-85 to +84, 0*, or Auto
-128 through 0*, or 0
through +127
Description
Sets the distance in lines from the
top margin to the first print line of
the form (does not add these lines
to the form as the top margin
does). Scroll can be used to allow
existing software to take advantage
of the zero-waste capability. If the
first line is printed too high on the
paper after aligning the edge with
the tear bar, use Scroll to position
it lower on the page. Scroll does
not modify the top of form
position. It is not recommended to
use this with, or in place of, Top
Margin.
Available only when the optional
FormsCutter is installed. See the
FormsCutter manual for more
information.
Sets the print position in 72nds of
an inch from the top of the form.
This may be used to align the
vertical print position to match a
preprinted form which does not
begin at an even number of lines
from the top edge of the paper.