Appendix D - Optional Buffer Expansion - Printek FormsPro 4300 Operation Manual

Serial matrix printers
Hide thumbs Also See for FormsPro 4300:
Table of Contents

Advertisement

OPTIONAL BUFFER EXPANSION
The FormsPro 4000 series printers are available with an optional buffer expansion that
increases the input buffer from 4K to 28K characters. This option can be installed either at
the factory or in the field. Field installation, as described below, should be performed only by
qualified service personnel. For installation, please contact the company who sold you the
printer or contact Printek, Inc. Customer Service at 800-368-4636 for the name of the
authorized service center nearest you.
CAUTION: The buffer IC as well as other components of
the printer can be damaged by static electricity. When
you install this option, try to do so in an uncarpeted area
if possible. Before touching the printer electronics, touch
the metal case of the printer to discharge any static
charge you may be carrying.
1.
Turn the printer off.
2.
Remove the three screws on the rear of the unit that secure the top cover in place.
Then slide the top cover out of the back of the printer to expose the main circuit
board.
APPENDIX D
Page D-1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents