Epson FX Emulation
Control Codes and Escape Sequences
Communications
Cancel Line
Cancels all printable text in the current print line. Does not affect any control codes or escape
sequences.
Control code:
Hexadecimal:
Delete Character
Deletes the last printable character from the current line. Does not affect any control codes or escape
sequences.
Control code:
Hexadecimal:
End of Text
If "ETX/ACK" is set to "On" in the serial interface setup menu, then receipt of an ETX causes the
printer to transmit an ACK to the host computer.
Since the ETX may be a legal value within an escape sequence, it is the user's responsibility to ensure
that an ETX used for data handshake is not sent within an escape sequence. The user must also ensure
that the maximum block size or the number of blocks sent at one time does not exceed the input buffer
size of the printer.
ETX/ACK handshake is available only with serial I/O.
If the printing of low symbols is enabled, ETX will be treated as a printable character instead of an I/O
handshake control code.
Control code:
Hexadecimal:
20
Grouped by Function
CAN
18
DEL
7F
ETX
03
CAN
DEL
ETX