Line Pitch - Printek FormsMaster 8000 Programmer's Manual

Escape Sequence:
Hexadecimal:
Select Print Mode
Selects print mode n according to the following chart. Overrides the "Font" value in the forms menu.
n
0
1
2
3
Example: The following escape sequence will select the IBM Proprinter letter quality font.
Escape Sequence:
Hexadecimal:

Line Pitch

Select 8 LPI
Sets the line spacing to 1/8 of an inch per line (8 lpi). Overrides the "Lines/Inch" value in the forms
menu.
Escape Sequence:
Hexadecimal:
Set Line Spacing to 7/72"
Sets the line spacing to 7/72 of an inch per line. Since the distance between print head wires is 1/72 of
an inch, this is equivalent to setting seven wire spacing. This is not particularly useful for text, but
may be useful for graphics if 7-bit graphics data is being sent. Overrides the "Lines/Inch" value in the
forms menu.
Escape Sequence:
Hexadecimal:
Start Line Spacing
Sets the line spacing to the value selected by ESC A n. Overrides the "Lines/Inch" value in the forms
menu.
Escape Sequence:
Hexadecimal:
Set Line Spacing to n/216"
Sets the line spacing to n/216 of an inch per line. 0 n 255. Overrides the "Lines/Inch" value in the
forms menu.
ESC \ 4
1B 5C 04
Print Mode
Draft
Fast Draft 12 cpi
Letter Quality
Letter Quality
ESC I 3
1B 49 03
ESC 0
1B 30
ESC 1
1B 31
ESC 2
1B 32
IBM Proprinter Emulation
0 CAN EM SUB ESC
00 18 19 1A 1B
ESC I n
ESC 0
ESC 1
ESC 2
ESC 3 n
51