Advertisement
FP-541 Quick Start Guide
Control Panel indicators
Power & Status
Battery
(Green/Red)
(Yellow)
On
On
On
Flashing
Flashing
Flashing
Solid, Flashes Off
Every 2 Seconds
Flashing
Self-Test / Configuration print out
With power on, press the paper feed button twice quickly.
USB Access to Printer Web Pages
1.
Turn the printer ON.
2.
Connect a USB cable between the printer and a PC.
3.
To access the FP-541 web page, push the Power button twice rapidly. This will put the printer into Configuration mode.
4.
When the printer is in Configuration mode the POWER and FAULT LEDs will flash together.
a.
Open browser on your PC and type 169.254.200.1 into the address bar of the browser and hit Enter - A login box should appear:
b.
Type "0000" and hit Enter- you should now be at the home page for FP-541 Configuration.
5.
To return the printer to normal operating mode, double click the POWER button. The Power LED will be returned to a solid light.
Once the printer is connected via USB and in IP over USB mode it is temporarily not possible to access the Internet.
© 2017 Printek LLC 3515 Lakeshore Drive, St. Joseph, MI 49085 PH:269-925-3200
Alert
(Red)
Off
On
Booting up
Off
Off
Ready
Off
Flashing
Paper Error/Lid Open
Off
Off
Job is arriving
Off
Off
Job is printing
Off
Flashing
IP over USB active
Wireless Personal
Off
Off
Area Network active
Solid
Charging Battery
Battery Low
www.printek.com | E: info@printek.com
Power Button
Indication
Paper feed button
Function:
How to:
Power up
Press & Release
Power down
Press & Hold
Toggle IP over
Press Twice
USB on/off
Advance paper
Press once
Print setup
Press twice
report
Advertisement
