Character Attributes - Printek FormsMaster 8000 Programmer's Manual

Escape Sequence:
Hexadecimal:
Select Subscript or Superscript Mode
Selects subscript mode for n =1, or superscript mode for n=0. This will print characters about half the
normal height, in the bottom or top half of the normal character cell.
Example: The following escape sequence will select superscript mode.
Escape Sequence:
Hexadecimal:
Cancel Subscript and Superscript Mode
Cancels subscript and superscript mode.
Escape Sequence:
Hexadecimal:

Character Attributes

Select Emphasized Mode
Selects emphasized mode. This makes characters bolder by printing an extra dot to the right of each
dot normally found in the character matrix. This will cut the print speed in half, but will not require an
additional pass of the print head. Overrides the "Impact Force" value in the forms menu.
Escape Sequence:
Hexadecimal:
Cancel Emphasized Mode
Cancels emphasized mode. Overrides the "Impact Force" value in the forms menu.
Escape Sequence:
Hexadecimal:
Select Double-Strike Mode
Selects double-strike mode. This makes text bolder by printing it twice. This will cut the print speed
in half, because an additional pass of the print head will be required.
Escape Sequence:
Hexadecimal:
Cancel Double-Strike Mode
Cancels double-strike mode.
ESC [ @ 4
1B 5B 40 04
ESC S 0
1B 53 30
ESC T
1B 54
ESC E
1B 45
ESC F
1B 46
ESC G
1B 47
IBM Proprinter Emulation
0 0 0 34
00 00 00 22
2
02
ESC S n
ESC T
ESC E
ESC F
ESC G
ESC H
49