Advertisement
I-820 Quick Start Guide
Control Panel indicators
Control Panel
Power Button
Paper Feed Button
Power & Status
(Green/Red)
Flashing
Flashing
Flashing
Flashing
Self-Test / Configuration print out
With power on, press the Paper Feed button twice quickly.
Accessing the Configuration Menus through USB
1.
Turn the printer ON.
2.
Connect a USB cable between the printer and a PC.
3.
To access the I-820 web page, push the Power button twice rapidly. This will put the printer into Configuration mode.
4.
When the printer is in Configuration mode the POWER and FAULT LEDs will flash together.
A. Open browser on your PC and type 169.254.200.1 into the address bar of the browser and hit Enter - A login box should appear:
B. Type "0000" and hit Enter- you should now be at the home page for I-820 Configuration.
5.
Push the Power button twice rapidly to exit Configuration Mode.
© 2017 Printek LLC 3515 Lakeshore Drive, St. Joseph, MI 49085 PH:269-925-3200
Power Up
Power Down
Toggle IP over USB
on/off
Advance paper
Print Setup Report
Battery
(Yellow)
On
On
On
Flashing
Flashing
Off
Off
www.printek.com | E: info@printek.com
Press & Release
Press & Hold
Press twice
Press once(LF) or long (FF)
Press twice
Alert
(Red)
Off
On
Off
Off
Off
Flashing
Off
Off
Off
Off
Off
Flashing
On
Flashing
Off
Flashing
Off
On
Indication
Booting up(... 20 sec!)
Ready
Paper Error/Lid Open
Job is arriving
Job is printing
IP over USB active
Charging Battery
Battery Low
Restart the printer manually
Restore the printer firmware
Print head too hot
Advertisement
