Printek FormsMaster 8000 Programmer's Manual page 126

Coax/Twinax Command Interpreter
¬OFF
to prevent any inadvertent triggering of the interpreter by random combinations of data.
To assist in verifying that the proper EBCDIC characters are being sent to the coax/twinax port from
the host, the printer may be set to an EBCDIC Code Dump mode which will print the EBCDIC
character value of the characters received. To turn on this test mode, refer to the Printer Configuration
chapter in the FormsMaster 8000 Series Operator's Manual.
To verify that the interface is sending the correct ASCII characters to the printer electronics see the
Hex Dump chapter in this manual.
120