Character Attributes - Printek FormsPro 4300 Owner's Manual

Example: The following escape sequence will select 10 cpi character spacing. If
"CPI: 10" was not specified in the "Setup: FORM" menu, the specified default
character pitch will be selected instead of 10 cpi.
Escape Sequence:
Hexadecimal:
Example: The following escape sequence will select 12 cpi character spacing.
Escape Sequence:
Hexadecimal:

Character Attributes

Select Graphic Rendition
Selects the graphic rendition n from the following table.
n
0
1
3
4
For italic mode to work correctly, an Epson FX font must be selected (check the
"Font:" value in the "Setup: FORM" menu). The other available fonts do not include
italic characters.
Example: The following escape sequence will select emphasized mode.
Escape Sequence:
Hexadecimal:
ESC [ w
1B 5B 77
ESC [ 2
1B 5B 32
Rendition
Normal
Emphasized
Italic
Underline
ESC [ 1
1B 5B 31
DEC LA120 Emulation
w
77
m
6D
ESC [ n m
Page 5-5