Printer Controls - Printek FormsPro 4300 Owner's Manual

Printer Controls

Bell
Causes the printer's bell to sound.
Control code:
Hexadecimal:
Unidirectional Mode
Selects unidirectional mode for n=1, or bidirectional mode for n=0. Printing is
normally bidirectional. Unidirectional printing provides more accurate positioning,
but causes lower throughput.
Example: The following escape sequence will force unidirectional printing.
Escape Sequence:
Hexadecimal:
Automatic Modes
Selects automatic modes according to the following table.
n
0
1
2
3
Automatic carriage return mode causes the printer to automatically perform a carriage
return (CR) for each line feed (LF), vertical tab (VT), or form feed (FF) that it
receives. Overrides the "Auto CR:" value in the "Setup: INTERFACE" menu.
Automatic line feed mode causes the printer to automatically perform a line feed (LF)
for each carriage return (CR) it receives. Overrides the "Auto LF:" value in the
"Setup: INTERFACE" menu.
Example: The following escape sequence will select automatic carriage return mode.
Escape Sequence:
Hexadecimal:
BEL
07
ESC U 1
1B 55 31
Mode
Automatic modes off
Automatic carriage return
Automatic line feed
Both (1 and 2)
ESC A 1
1B 41 01
Printek Emulation
BEL
ESC U n
ESC A n
Page 7-17