Horizontal Position; Vertical Position - Printek FormsPro 4300 Owner's Manual

Printek Emulation

Horizontal Position

Carriage Return
Causes the current line to be printed, and then sets the current print position to the left
margin. If "Auto LF: On" is selected in the "Setup: INTERFACE" menu, a line feed
will also be performed.
Control code:
Hexadecimal:
Backspace
Causes the current line to be printed, and then moves the current print position one
space to the left. The actual distance moved depends on the current character
spacing. Backspacing can be done up to, but not beyond, the left margin.
Control code:
Hexadecimal:

Vertical Position

Line Feed
Causes the current line to be printed, and then advances the paper one line at the
current line spacing. If "Auto CR: On" is selected in the "Setup: INTERFACE"
menu, a carriage return will also be performed.
Control code:
Hexadecimal:
Reverse Line Feed
Causes the current line to be printed, and then retracts the paper one line at the current
line spacing. If "Auto CR: On" is selected in the "Setup: INTERFACE" menu, a
carriage return will also be performed.
Escape Sequence:
Hexadecimal:
Page 7-8
CR
0D
BS
08
LF
0A
ESC ^
1B 5E
CR
BS
LF
ESC ^