Printek FormsPro 4300 Owner's Manual page 34

Epson FX Emulation
Escape Sequence:
Hexadecimal:
Select 15 CPI
Selects 15 cpi. Cancels 12 cpi. Condensed mode is unaffected. The resulting
character spacing will be 15 cpi, even if condensed mode is also selected.
Escape Sequence:
Hexadecimal:
Select Condensed Mode
(or)
Selects condensed mode. The resulting character spacing will be 17.14 cpi if 10 cpi
was selected, or 20 cpi if 12 cpi was selected. If 15 cpi was selected, condensed
mode will have no affect.
Control code:
Hexadecimal:
Escape Sequence:
Hexadecimal:
Cancel Condensed Mode
Cancels condensed mode set by SI or ESC SI.
Control code:
Hexadecimal:
Select double-wide mode (one line)
(or)
Selects double-wide mode for one line. Double-wide mode doubles the width of all
characters, but does not affect character height. This mode is cancelled by a carriage
return or DC4.
Control code:
Hexadecimal:
Escape Sequence:
Hexadecimal:
Page 3-6
ESC M
1B 4D
ESC g
1B 67
SI
0F
ESC SI
1B 0F
DC2
12
SO
0E
ESC SO
1B 0E
ESC g
SI
ESC SI
DC2
SO
ESC SO